Data Structures - Cosmos Docs

Here we describe the data structures in the CometBFT blockchain and the rules for validating them. The CometBFT blockchain consists of a short list of data types:

Data Structures
- Block
- Execution
- Header
- Version
- BlockID
- PartSetHeader
- Part
- Time
- Data
- Commit
- CommitSig
- BlockIDFlag
- Vote
- CanonicalVote
- Proposal
- SignedMsgType
- Signature
- EvidenceList
- Evidence
  - DuplicateVoteEvidence
  - LightClientAttackEvidence
- LightBlock
- SignedHeader
- ValidatorSet
- Validator
- Address
- ConsensusParams
  - BlockParams
  - EvidenceParams
  - ValidatorParams
  - VersionParams
- Proof

Block

A block consists of a header, transactions, votes (the commit), and a list of evidence of malfeasance (ie. signing conflicting votes).

Name	Type	Description	Validation
Header	Header	Header corresponding to the block. This field contains information used throughout consensus and other areas of the protocol. To find out what it contains, visit header	Must adhere to the validation rules of header
Data	Data	Data contains a list of transactions. The contents of the transaction is unknown to CometBFT.	This field can be empty or populated, but no validation is performed. Applications can perform validation on individual transactions prior to block creation using checkTx.
Evidence	EvidenceList	Evidence contains a list of infractions committed by validators.	Can be empty, but when populated the validations rules from evidenceList apply
LastCommit	Commit	`LastCommit` includes one vote for every validator. All votes must either be for the previous block, nil or absent. If a vote is for the previous block it must have a valid signature from the corresponding validator. The sum of the voting power of the validators that voted must be greater than 2/3 of the total voting power of the complete validator set. The number of votes in a commit is limited to 10000 (see `types.MaxVotesCount`).	Must be empty for the initial height and must adhere to the validation rules of commit.

Execution

Once a block is validated, it can be executed against the state. The state follows this recursive equation:

state(initialHeight) = InitialState
state(h+1) <- Execute(state(h), ABCIApp, block(h))

where InitialState includes the initial consensus parameters and validator set, and ABCIApp is an ABCI application that can return results and changes to the validator set (TODO). Execute is defined as:

func Execute(state State, app ABCIApp, block Block) State {
 // Fuction ApplyBlock executes block of transactions against the app and returns the new root hash of the app state,
 // modifications to the validator set and the changes of the consensus parameters.
 AppHash, ValidatorChanges, ConsensusParamChanges := app.ApplyBlock(block)

 nextConsensusParams := UpdateConsensusParams(state.ConsensusParams, ConsensusParamChanges)
 return State{
  ChainID:         state.ChainID,
  InitialHeight:   state.InitialHeight,
  LastResults:     abciResponses.DeliverTxResults,
  AppHash:         AppHash,
  LastValidators:  state.Validators,
  Validators:      state.NextValidators,
  NextValidators:  UpdateValidators(state.NextValidators, ValidatorChanges),
  ConsensusParams: nextConsensusParams,
  Version: {
   Consensus: {
    AppVersion: nextConsensusParams.Version.AppVersion,
   },
  },
 }
}

Validating a new block is first done prior to the prevote, precommit & finalizeCommit stages. The steps to validate a new block are:

Check the validity rules of the block and its fields.
Check the versions (Block & App) are the same as in local state.
Check the chainID’s match.
Check the height is correct.
Check the LastBlockID corresponds to BlockID currently in state.
Check the hashes in the header match those in state.
Verify the LastCommit against state, this step is skipped for the initial height.
- This is where checking the signatures correspond to the correct block will be made.
Make sure the proposer is part of the validator set.
Validate bock time.
- Make sure the new blocks time is after the previous blocks time.
- Calculate the medianTime and check it against the blocks time.
- If the blocks height is the initial height then check if it matches the genesis time.
Validate the evidence in the block. Note: Evidence can be empty

A block header contains metadata about the block and about the consensus, as well as commitments to the data in the current block, the previous block, and the results returned by the application:

Name	Type	Description	Validation
Version	Version	Version defines the application and block versions being used.	Must adhere to the validation rules of Version
ChainID	String	ChainID is the ID of the chain. This must be unique to your chain.	ChainID must be less than 50 bytes.
Height	uint64	Height is the height for this header.	Must be > 0, >= initialHeight, and == previous Height+1
Time	Time	The timestamp is equal to the weighted median of validators present in the last commit. Read more on time in the BFT-time section. Note: the timestamp of a vote must be greater by at least one millisecond than that of the block being voted on.	Time must be >= previous header timestamp + consensus parameters TimeIotaMs. The timestamp of the first block must be equal to the genesis time (since there’s no votes to compute the median).
LastBlockID	BlockID	BlockID of the previous block.	Must adhere to the validation rules of blockID. The first block has `block.Header.LastBlockID == BlockID{}`.
LastCommitHash	slice of bytes (`[]byte`)	MerkleRoot of the lastCommit’s signatures. The signatures represent the validators that committed to the last block. The first block has an empty slices of bytes for the hash.	Must be of length 32
DataHash	slice of bytes (`[]byte`)	MerkleRoot of the hash of transactions. Note: The transactions are hashed before being included in the merkle tree, the leaves of the Merkle tree are the hashes, not the transactions themselves.	Must be of length 32
ValidatorHash	slice of bytes (`[]byte`)	MerkleRoot of the current validator set. The validators are first sorted by voting power (descending), then by address (ascending) prior to computing the MerkleRoot.	Must be of length 32
NextValidatorHash	slice of bytes (`[]byte`)	MerkleRoot of the next validator set. The validators are first sorted by voting power (descending), then by address (ascending) prior to computing the MerkleRoot.	Must be of length 32
ConsensusHash	slice of bytes (`[]byte`)	Hash of the protobuf encoded consensus parameters.	Must be of length 32
AppHash	slice of bytes (`[]byte`)	Arbitrary byte array returned by the application after executing and commiting the previous block. It serves as the basis for validating any merkle proofs that comes from the ABCI application and represents the state of the actual application rather than the state of the blockchain itself. The first block’s `block.Header.AppHash` is given by `ResponseInitChain.app_hash`.	This hash is determined by the application, CometBFT can not perform validation on it.
LastResultHash	slice of bytes (`[]byte`)	`LastResultsHash` is the root hash of a Merkle tree built from `ResponseDeliverTx` responses (`Log`,`Info`, `Codespace` and `Events` fields are ignored).	Must be of length 32. The first block has `block.Header.ResultsHash == MerkleRoot(nil)`, i.e. the hash of an empty input, for RFC-6962 conformance.
EvidenceHash	slice of bytes (`[]byte`)	MerkleRoot of the evidence of Byzantine behavior included in this block.	Must be of length 32
ProposerAddress	slice of bytes (`[]byte`)	Address of the original proposer of the block. Validator must be in the current validatorSet.	Must be of length 20

Version

NOTE: that this is more specifically the consensus version and doesn’t include information like the P2P Version. (TODO: we should write a comprehensive document about versioning that this can refer to)

Name	type	Description	Validation
Block	uint64	This number represents the block version and must be the same throughout an operational network	Must be equal to block version being used in a network (`block.Version.Block == state.Version.Consensus.Block`)
App	uint64	App version is decided on by the application. Read here	`block.Version.App == state.Version.Consensus.App`

BlockID

The BlockID contains two distinct Merkle roots of the block. The BlockID includes these two hashes, as well as the number of parts (ie. len(MakeParts(block)))

Name	Type	Description	Validation
Hash	slice of bytes (`[]byte`)	MerkleRoot of all the fields in the header (ie. `MerkleRoot(header)`.	hash must be of length 32
PartSetHeader	PartSetHeader	Used for secure gossiping of the block during consensus, is the MerkleRoot of the complete serialized block cut into parts (ie. `MerkleRoot(MakeParts(block))`).	Must adhere to the validation rules of PartSetHeader

See MerkleRoot for details.

PartSetHeader

Name	Type	Description	Validation
Total	int32	Total amount of parts for a block	Must be > 0
Hash	slice of bytes (`[]byte`)	MerkleRoot of a serialized block	Must be of length 32

Part

Part defines a part of a block. In CometBFT blocks are broken into parts for gossip.

Name	Type	Description	Validation
index	int32	Total amount of parts for a block	Must be > 0
bytes	bytes	MerkleRoot of a serialized block	Must be of length 32
proof	Proof	MerkleRoot of a serialized block	Must be of length 32

Time

CometBFT uses the Google.Protobuf.Timestamp format, which uses two integers, one 64 bit integer for Seconds and a 32 bit integer for Nanoseconds.

Data

Data is just a wrapper for a list of transactions, where transactions are arbitrary byte arrays:

Name	Type	Description	Validation
Txs	Matrix of bytes ([][]byte)	Slice of transactions.	Validation does not occur on this field, this data is unknown to CometBFT

Commit

Commit is a simple wrapper for a list of signatures, with one for each validator. It also contains the relevant BlockID, height and round:

Name	Type	Description	Validation
Height	int64	Height at which this commit was created.	Must be > 0
Round	int32	Round that the commit corresponds to.	Must be > 0
BlockID	BlockID	The blockID of the corresponding block.	Must adhere to the validation rules of BlockID.
Signatures	Array of CommitSig	Array of commit signatures that correspond to current validator set.	Length of signatures must be > 0 and adhere to the validation of each individual Commitsig

ExtendedCommit

ExtendedCommit, similarly to Commit, wraps a list of votes with signatures together with other data needed to verify them. In addition, it contains the verified vote extensions, one for each non-nil vote, along with the extension signatures.

Name	Type	Description	Validation
Height	int64	Height at which this commit was created.	Must be > 0
Round	int32	Round that the commit corresponds to.	Must be > 0
BlockID	BlockID	The blockID of the corresponding block.	Must adhere to the validation rules of BlockID.
ExtendedSignatures	Array of ExtendedCommitSig	The current validator set’s commit signatures, extension, and extension signatures.	Length of signatures must be > 0 and adhere to the validation of each individual ExtendedCommitSig

CommitSig

CommitSig represents a signature of a validator, who has voted either for nil, a particular BlockID or was absent. It’s a part of the Commit and can be used to reconstruct the vote set given the validator set.

Name	Type	Description	Validation
BlockIDFlag	BlockIDFlag	Represents the validators participation in consensus: its vote was not received, voted for the block that received the majority, or voted for nil	Must be one of the fields in the BlockIDFlag enum
ValidatorAddress	Address	Address of the validator	Must be of length 20
Timestamp	Time	This field will vary from `CommitSig` to `CommitSig`. It represents the timestamp of the validator.	Time
Signature	Signature	Signature corresponding to the validators participation in consensus.	The length of the signature must be > 0 and < than 64

NOTE: ValidatorAddress and Timestamp fields may be removed in the future (see ADR-25).

ExtendedCommitSig

ExtendedCommitSig represents a signature of a validator that has voted either for nil, a particular BlockID or was absent. It is part of the ExtendedCommit and can be used to reconstruct the vote set given the validator set. Additionally it contains the vote extensions that were attached to each non-nil precommit vote. All these extensions have been verified by the application operating at the signing validator’s node.

Name	Type	Description	Validation
BlockIDFlag	BlockIDFlag	Represents the validators participation in consensus: its vote was not received, voted for the block that received the majority, or voted for nil	Must be one of the fields in the BlockIDFlag enum
ValidatorAddress	Address	Address of the validator	Must be of length 20
Timestamp	Time	This field will vary from `CommitSig` to `CommitSig`. It represents the timestamp of the validator.
Signature	Signature	Signature corresponding to the validators participation in consensus.	Length must be > 0 and < 64
Extension	bytes	Vote extension provided by the Application running on the sender of the precommit vote, and verified by the local application.	Length must be zero if BlockIDFlag is not `Commit`
ExtensionSignature	Signature	Signature of the vote extension.	Length must be > 0 and < than 64 if BlockIDFlag is `Commit`, else 0

BlockIDFlag

BlockIDFlag represents which BlockID the signature is for.

enum BlockIDFlag {
  BLOCK_ID_FLAG_UNKNOWN = 0; // indicates an error condition
  BLOCK_ID_FLAG_ABSENT  = 1; // the vote was not received
  BLOCK_ID_FLAG_COMMIT  = 2; // voted for the block that received the majority
  BLOCK_ID_FLAG_NIL     = 3; // voted for nil
}

Vote

A vote is a signed message from a validator for a particular block. The vote includes information about the validator signing it. When stored in the blockchain or propagated over the network, votes are encoded in Protobuf.

Name	Type	Description	Validation
Type	SignedMsgType	The type of message the vote refers to	Must be `PrevoteType` or `PrecommitType`
Height	int64	Height for which this vote was created for	Must be > 0
Round	int32	Round that the commit corresponds to.	Must be > 0
BlockID	BlockID	The blockID of the corresponding block.
Timestamp	Time	Timestamp represents the time at which a validator signed.
ValidatorAddress	bytes	Address of the validator	Length must be equal to 20
ValidatorIndex	int32	Index at a specific block height corresponding to the Index of the validator in the set.	Must be > 0
Signature	bytes	Signature by the validator if they participated in consensus for the associated block.	Length must be > 0 and < 64
Extension	bytes	Vote extension provided by the Application running at the validator’s node.	Length can be 0
ExtensionSignature	bytes	Signature for the extension	Length must be > 0 and < 64

CanonicalVote

CanonicalVote is for validator signing. This type will not be present in a block. Votes are represented via CanonicalVote and also encoded using protobuf via type.SignBytes which includes the ChainID, and uses a different ordering of the fields.

Name	Type	Description	Validation
Type	SignedMsgType	The type of message the vote refers to	Must be `PrevoteType` or `PrecommitType`
Height	int64	Height in which the vote was provided.	Must be > 0
Round	int64	Round in which the vote was provided.	Must be > 0
BlockID	string	ID of the block the vote refers to.
Timestamp	string	Time of the vote.
ChainID	string	ID of the blockchain running consensus.

For signing, votes are represented via CanonicalVote and also encoded using protobuf via type.SignBytes which includes the ChainID, and uses a different ordering of the fields. We define a method Verify that returns true if the signature verifies against the pubkey for the SignBytes using the given ChainID:

func (vote *Vote) Verify(chainID string, pubKey crypto.PubKey) error {
 if !bytes.Equal(pubKey.Address(), vote.ValidatorAddress) {
  return ErrVoteInvalidValidatorAddress
 }
 v := vote.ToProto()
 if !pubKey.VerifyBytes(types.VoteSignBytes(chainID, v), vote.Signature) {
  return ErrVoteInvalidSignature
 }
 return nil
}

CanonicalVoteExtension

Vote extensions are signed using a representation similar to votes. This is the structure to marshall in order to obtain the bytes to sign or verify the signature.

Name	Type	Description	Validation
Extension	bytes	Vote extension provided by the Application.	Can have zero length
Height	int64	Height in which the extension was provided.	Must be > 0
Round	int64	Round in which the extension was provided.	Must be > 0
ChainID	string	ID of the blockchain running consensus.

Proposal

Proposal contains height and round for which this proposal is made, BlockID as a unique identifier of proposed block, timestamp, and POLRound (a so-called Proof-of-Lock (POL) round) that is needed for termination of the consensus. If POLRound >= 0, then BlockID corresponds to the block that is locked in POLRound. The message is signed by the validator private key.

Name	Type	Description	Validation
Type	SignedMsgType	Represents a Proposal SignedMsgType	Must be `ProposalType` signedMsgType
Height	uint64	Height for which this vote was created for	Must be > 0
Round	int32	Round that the commit corresponds to.	Must be > 0
POLRound	int64	Proof of lock	Must be > 0
BlockID	BlockID	The blockID of the corresponding block.	BlockID
Timestamp	Time	Timestamp represents the time at which a validator signed.	Time
Signature	slice of bytes (`[]byte`)	Signature by the validator if they participated in consensus for the associated bock.	Length of signature must be > 0 and < 64

SignedMsgType

Signed message type represents a signed messages in consensus.

enum SignedMsgType {

  SIGNED_MSG_TYPE_UNKNOWN = 0;
  // Votes
  SIGNED_MSG_TYPE_PREVOTE   = 1;
  SIGNED_MSG_TYPE_PRECOMMIT = 2;

  // Proposal
  SIGNED_MSG_TYPE_PROPOSAL = 32;
}

Signature

Signatures in CometBFT are raw bytes representing the underlying signature. See the signature spec for more.

EvidenceList

EvidenceList is a simple wrapper for a list of evidence:

Name	Type	Description	Validation
Evidence	Array of Evidence	List of verified evidence	Validation adheres to individual types of Evidence

Evidence

Evidence in CometBFT is used to indicate breaches in the consensus by a validator. More information on how evidence works in CometBFT can be found here

DuplicateVoteEvidence

DuplicateVoteEvidence represents a validator that has voted for two different blocks in the same round of the same height. Votes are lexicographically sorted on BlockID.

Name	Type	Description	Validation
VoteA	Vote	One of the votes submitted by a validator when they equivocated	VoteA must adhere to Vote validation rules
VoteB	Vote	The second vote submitted by a validator when they equivocated	VoteB must adhere to Vote validation rules
TotalVotingPower	int64	The total power of the validator set at the height of equivocation	Must be equal to nodes own copy of the data
ValidatorPower	int64	Power of the equivocating validator at the height	Must be equal to the nodes own copy of the data
Timestamp	Time	Time of the block where the equivocation occurred	Must be equal to the nodes own copy of the data

LightClientAttackEvidence

LightClientAttackEvidence is a generalized evidence that captures all forms of known attacks on a light client such that a full node can verify, propose and commit the evidence on-chain for punishment of the malicious validators. There are three forms of attacks: Lunatic, Equivocation and Amnesia. These attacks are exhaustive. You can find a more detailed overview of this here

Name	Type	Description	Validation
ConflictingBlock	LightBlock	Read Below	Must adhere to the validation rules of lightBlock
CommonHeight	int64	Read Below	must be > 0
Byzantine Validators	Array of Validators	validators that acted maliciously	Read Below
TotalVotingPower	int64	The total power of the validator set at the height of the infraction	Must be equal to the nodes own copy of the data
Timestamp	Time	Time of the block where the infraction occurred	Must be equal to the nodes own copy of the data

LightBlock

LightBlock is the core data structure of the light client. It combines two data structures needed for verification (signedHeader & validatorSet).

Name	Type	Description	Validation
SignedHeader	SignedHeader	The header and commit, these are used for verification purposes. To find out more visit light client docs	Must not be nil and adhere to the validation rules of signedHeader
ValidatorSet	ValidatorSet	The validatorSet is used to help with verify that the validators in that committed the infraction were truly in the validator set.	Must not be nil and adhere to the validation rules of validatorSet

The SignedHeader and ValidatorSet are linked by the hash of the validator set(SignedHeader.ValidatorsHash == ValidatorSet.Hash().

SignedHeader

The SignedhHeader is the header accompanied by the commit to prove it.

Name	Type	Description	Validation
Header	Header	Header	Header cannot be nil and must adhere to the Header validation criteria
Commit	Commit	Commit	Commit cannot be nil and must adhere to the Commit criteria

ValidatorSet

Name	Type	Description	Validation
Validators	Array of validator	List of the active validators at a specific height	The list of validators can not be empty or nil and must adhere to the validation rules of validator
Proposer	validator	The block proposer for the corresponding block	The proposer cannot be nil and must adhere to the validation rules of validator

Validator

Name	Type	Description	Validation
Address	Address	Validators Address	Length must be of size 20
Pubkey	slice of bytes (`[]byte`)	Validators Public Key	must be a length greater than 0
VotingPower	int64	Validators voting power	cannot be < 0
ProposerPriority	int64	Validators proposer priority. This is used to gauge when a validator is up next to propose blocks	No validation, value can be negative and positive

Address

Address is a type alias of a slice of bytes. The address is calculated by hashing the public key using sha256 and truncating it to only use the first 20 bytes of the slice.

const (
  TruncatedSize = 20
)

func SumTruncated(bz []byte) []byte {
  hash := sha256.Sum256(bz)
  return hash[:TruncatedSize]
}

ConsensusParams

Name	Type	Description	Field Number
block	BlockParams	Parameters limiting the size of a block and time between consecutive blocks.	1
evidence	EvidenceParams	Parameters limiting the validity of evidence of byzantine behavior.	2
validator	ValidatorParams	Parameters limiting the types of public keys validators can use.	3
version	BlockParams	The ABCI application version.	4

BlockParams

Name	Type	Description	Field Number
max_bytes	int64	Max size of a block, in bytes.	1
max_gas	int64	Max sum of `GasWanted` in a proposed block. NOTE: blocks that violate this may be committed if there are Byzantine proposers. It’s the application’s responsibility to handle this when processing a block!	2

EvidenceParams

Name	Type	Description	Field Number
max_age_num_blocks	int64	Max age of evidence, in blocks.	1
max_age_duration	google.protobuf.Duration	Max age of evidence, in time. It should correspond with an app’s “unbonding period” or other similar mechanism for handling Nothing-At-Stake attacks.	2
max_bytes	int64	maximum size in bytes of total evidence allowed to be entered into a block	3

ValidatorParams

Name	Type	Description	Field Number
pub_key_types	repeated string	List of accepted public key types. Uses same naming as `PubKey.Type`.	1

VersionParams

Name	Type	Description	Field Number
app_version	uint64	The ABCI application version.	1

Proof

Name	Type	Description	Field Number
total	int64	Total number of items.	1
index	int64	Index item to prove.	2
leaf_hash	bytes	Hash of item value.	3
aunts	repeated bytes	Hashes from leaf’s sibling to a root’s child.	4

​Block

​Execution

​Header

​Version

​BlockID

​PartSetHeader

​Part

​Time

​Data

​Commit

​ExtendedCommit

​CommitSig

​ExtendedCommitSig

​BlockIDFlag

​Vote

​CanonicalVote

​CanonicalVoteExtension

​Proposal

​SignedMsgType

​Signature

​EvidenceList

​Evidence

​DuplicateVoteEvidence

​LightClientAttackEvidence

​LightBlock

​SignedHeader

​ValidatorSet

​Validator

​Address

​ConsensusParams

​BlockParams

​EvidenceParams

​ValidatorParams

​VersionParams

​Proof